PORSCHE 986 ENGINE GASKET
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Take your 991.1 or 991.2 turbo or turbo s to a new level with these muffler bypass pipes. They produce the wildest sound available on the market today and are a perfect upgrade for level 3 or 4 car used on the track. They produce loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. Features: - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni1...(choose a part on the right to read more)
Our street version muffler set is perfect for those more concerned with a quality Porsche flat 6 sound rather than just an increase in decibels. This is the perfect addition for a cabriolet, for those concerned about drone, or for those interested in a quality flat 6 exhaust note without drawing to much attention. These are also ideal for anyone planning or running sport cats or bypass as they will offer more dampening so that extreme decibels are not experienced. These mufflers also pass the strict decibel limits set by the German TUV and they include TUV certification. Features: - + 8 crank hp & + 8 crank torque - weighs 35.7 lbs. (16.2 kg) - German v2a - x5crni18-10 - 1.4301 (t304) stainless steel for improv...(choose a part on the right to read more)
General Fitment 911 1998-05
From $1,807.30
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
Brombacher race exhaust system for 997 GT3/rs (super sound) with rsr style tips & center muffler adapters to run stock center muffler.
Facts:
- + 25 crank hp & + 25 crank torque with use of stock center muffler.
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (90 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 34.7 lbs. (15.7 kg) this is the lightest stainless system in the Brombacherline !**
- 51.8 lb (23.5 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- bypass' center muffler with straight p...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$4,978.60
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
Em-47-7347 dual 40 type 2/4 kit w/ cleaners
This is the EMPI hpmx 40 idf dual carb kit for 1700 cc and larger engines. This kit also comes with complete instructions on installation on the 914 engine. This kit comes with a proven hex bar linkage with aircraft heim joints. Includes aluminum manifolds and all necessary hardware and gaskets. This kit comes with washable air cleaners, and chrome steel base and cover plate. These carbs come to us now tuned with a stamped identification. When switching from fuel injection to carburetors, each kits require a lower-pressure fuel pump (part number r90160810600) and a different distributor (part number r0231178009)
General Fitment 914 1970-76
$1,080.00
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system features mandrel bends that are optimized for maximum flow.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Simple and easy direct bolt-on replacement headers for all stock 987 headers....(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$3,921.95
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
Product details:
Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,595.00
Make a selection
FVD 997 GT3 4.1 level 3 kit - max. Power - 485 hp (357 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: mahle piston & cylinder set 4.1 l (106mm), 997.1 & 997.2 GT3/rs x 1 FVD software upgrade for 3.6 l to 4.1l with my genius flash tool x 1 bmc sport air filter for 997.1 GT3 x 1 intake manifold 4.0 l x 1 engine gasket set 997 GT3 x 1 cylinder head gaskets for 4.1 l FVD conversion x 2 cylinder base gasket for 4.1 l FVD conversion x 2 intermediate shaft bearings x 2 intermediate shaft thrust bearings x 2 connecti...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $14,548.75
Make a selection
FVD 997.2 GT3 4.1- level 3 kit - max. Power - 500 hp (368 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: - 4.1 liter pistons & cylinders - ecu software (handheld flash programmer) - sport air filter - complete engine gasket set - all necessary FVD designed hardware. (includes spark plugs, bolts, nuts, etc.) further additional parts/work required: - connection rods (22mm pin) FVD10397520 - modification of the water housing - modification of the customer's original crankcase we recommend the use of an m&m exha...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $14,537.44
Make a selection
The engine leakage tester drv 05 detects engine defects quickly. Inlet valve or outlet valve defects,piston/pistonrings defects,cylinder head gasket defects . Pressure of compressed air between 6 and 12 bar ! Made in Germany (hazet)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This is a race proven exhaust system suitable for the street. You'll see a 7 - 15% increase in horsepower depending on what other modifications you have made to your engine. we have made minor changes to the basic design to allow it to be used with ported heads for modified engines. While some people believe "bigger is better", we have found that the 1 1/2" tube gives you the horse power and torque in the power band of your engine. Mate with our super trap muffler for the ultimate in sound and poser rst4462517 specify engine size when ordering.
Includes 1x collector, 1x reducer, 1x collector gasket, 1x pinch nut assembly: 1x nut, bolt, washer
Sae 5/16 x18 hardware.
General Fitment 914 1970-76
A track favorite due to its performance gains and reliability. + 30 hp & + 25 tq gain. - catalytic bypass for track use. - weighs 59 lbs. (27,0 kg), OEM weighs 84 lbs. (38kg). - motorsport merge collector. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - "aero quip" style motorsport muffler connections with a single gasket and flange at the header to ensure a leak free exhaust. - ecu programming (software) is necessary. The FVD Brombacherfull race exhaust system for the 981 and is one of the most technically advanced systems for Porsche to date. Our entire "brombacher" line of exhausts is manufactured to ou...(choose a part on the right to read more)
$5,710.10
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|